Overall Machine Condition:

• Check for any signs of wear, rust, or damage on the machine’s exterior.
• Ensure the machine frame and structure are stable and in good condition.

Spindle and Tooling:

• Inspect the spindle for any unusual noise, vibrations, or wobbling.
• Verify that cutting tools are securely fastened and in good condition.

Table and Workholding:

• Check the table surface for flatness and any signs of damage.
• Inspect workholding devices, such as clamps or vacuum systems, for proper clamping and alignment.

Axis Movement:

• Jog each axis through its full range of motion to check for smooth movement.
• Verify there is no backlash or excessive play in any of the axes.

Way Covers and Seals:

• Check way covers for damage or obstruction and ensure they move freely.
• Inspect seals to prevent contamination of critical components.

Vacuum System (if applicable):

• Verify the proper functioning of the vacuum system for workpiece hold-down.
• Inspect hoses and fittings for leaks or damage.

Cooling System:

• Check the coolant level and ensure it is at the appropriate concentration.
• Inspect hoses, pump, and heat exchanger for leaks or damage.

Electrical Components:

• Verify that all electrical components, including switches, buttons, and lights, are functioning properly.
• Check the wiring for any signs of wear or damage.

Dust Collection System:

• Inspect the dust collection system for proper functioning.
• Check filters and replace them as needed to maintain efficient dust extraction.

Safety Features:

• Test emergency stop buttons to ensure they function correctly.
• Check interlocks and safety guards for proper operation.